Serving Hamilton, Ancaster, Dundas & Surrounding Areas
How Much Do Screw Piles Cost? Hamilton Deck Footings

How Much Do Screw Piles Cost? Hamilton Deck Footings

October 30, 2026•14 min read

Updated October 30, 2026

Ask three installers what a deck foundation costs and you can get three answers that don't line up. One prices by the pile, one by the job, and one leaves the paperwork out. This guide sets out what screw pile deck footings cost in Hamilton, what moves the price, and how the bill for a common deck adds up line by line.

Direct Answer: How much do screw piles cost? Postech's published range for a standard residential deck of 6 to 10 piles is $1,500 to $4,500 installed [1]. In Hamilton, add a $291 minimum permit fee [2]. The pile count and the engineer approved specifications come from the deck design, so a per pile price is not the total [3].

TL;DR

  • Postech publishes $1,500 to $4,500 installed for a standard deck of 6 to 10 piles, a network-wide range [1].

  • A per pile price becomes a total only when the design sets the pile count [3].

  • Hamilton's deck checklist asks for engineer approved pile specifications, so they belong in the quote [4].

  • Pile model, depth, access and mobilization move the piles line.

  • An attached deck needs a permit at any size. The $291 minimum covers decks up to about 54 square metres [2][5].

  • Piles installed before the permit is issued add 25% to the permit fee [6].

Send the plan first. The count, the model and the paperwork set the price.

How much do screw piles cost for a Hamilton deck?

In short: Budget $1,791 to $4,791 before tax for piles and permit on a 12 x 16 ft attached deck.

How much do screw piles cost? Postech, which makes the piles Postech Hamilton installs, publishes a typical figure. A standard residential deck of 6 to 10 piles "typically runs from $1,500 to $4,500 installed" [1].

That range covers Postech's whole dealer network. It isn't a Postech Hamilton quote. The same page says why: "The only accurate number comes from a site-specific quote." [1] Where your deck lands depends on six things: pile count and model, depth, access, engineering, permits and mobilization.

What screw piles cost is only one line on the bill. A deck attached to the house needs a City of Hamilton building permit at any size [5]. Where the deck sits on helical piers, the City's deck checklist also asks for engineer approved specifications [4]. The table shows what helical piles for decks cost on a 12 x 16 ft attached deck in Hamilton, one line at a time.

Line item

Cost

Where the figure comes from

Screw piles, installed

$1,500 to $4,500

Postech's published range for a standard residential deck of 6 to 10 piles [1]

Building permit

$291

City of Hamilton minimum permit fee [2]

Utility locates

$0

Ontario Dig Authority, where the request is free [7]

Engineer approved pile specifications

Ask if it is in the quote

On the City's deck checklist where helical piers are used [4]

HST

13% where it applies

Canada Revenue Agency [8]

Total before tax

$1,791 to $4,791

Piles plus permit

The permit line. Hamilton prices a deck permit by floor area, at $5.36 per square metre [2]. A 12 x 16 ft deck is 17.84 square metres, so the formula gives about $96. That is below the City's $291 minimum, so the minimum is what you pay [2].

The assumptions. The example assumes:

  • An uncovered deck attached to the house

  • No hot tub or roof load

  • A clear path into the yard for the machine

Change any of those and the piles line moves. The total also leaves out HST and any engineering fee billed on its own line. Ask what a quote includes before you compare it with another.

If your deck is already built and has started to sink or heave, see our guide to deck footing replacement or our sinking deck repair service.

Screw pile cost per pile: why pile count and engineering come first

In short: The design sets the pile count and the pile specifications. Ask for a quote built from the plan.

A screw pile cost per pile figure becomes a price only when you know how many piles the deck needs. That number comes from the design [3]. On a permitted Hamilton deck, so do the engineer approved pile specifications, which is why both belong in the quote from the start [4].

Online charts match a pile count to a deck size. The Canadian Construction Materials Centre, the National Research Council body that evaluates building products, puts the decision with the designer. For the steel pile systems it evaluates, a registered professional engineer "must determine the number and spacing" of the piles needed to carry the loads [3]. The engineer also provides a "signed and sealed certificate" for the installation [3].

Hamilton's paperwork works the same way. Where a deck sits on helical piers, the City's permit checklist asks for engineer approved specifications [4].

The count moves the bill more than the unit price does. Postech says a standard residential deck "typically requires between 6 and 12 piles" [9]. Whatever the screw pile cost for one, 12 piles cost twice what 6 do. What sets the count is the structure:

  • Where the beams run and how far they span

  • How high the deck stands

  • A roof, which adds snow and wind load to the posts under it

  • Stairs and landings, which may need foundation points of their own

  • A hot tub or other concentrated load

Per pile price times a guessed count

Quote built from the deck plan

Pile count

Taken from the deck's length and width

Set by the beam layout, spans, height and loads

Pile model

One size assumed at every post

Matched to the load at each post

Engineer approved specifications

Not part of the number

Listed, since the City's checklist asks for them [4]

Permit application

Still needs the pile specifications

Drawings and pile specifications go in together

Send the plan first and the count arrives with the price. Postech's installers quote with "pile count, specifications, and a total price before any work begins" [9]. See how a deck pile layout is planned for what the layout takes into account.

What moves screw piles cost on site: pile model, depth, access and mobilization

In short: A larger shaft, deeper bearing soil, tight access and a small job each push the piles line up.

The cost of screw piles for your deck can differ from the deck next door, even at the same pile count. Postech puts it this way: "Cost depends on the number of piles, pile diameter, site conditions, and your region." [1] Four drivers come from your structure and your yard.

Driver

What raises the price

What to send with a quote request

Pile model

Heavier loads that call for a larger shaft

The deck plan, with any roof or hot tub marked

Depth

Bearing soil that sits deeper than the planned shaft

The address, and what you know about the ground

Access

A narrow gate, a slope or finished landscaping in the path

Photos of the route from the street to the deck

Mobilization

A small job that carries the whole trip

Every structure you want on piles

Pile model and shaft size

Screw piles come in sizes. Postech's product list starts at a 1 7/8 inch shaft and includes 2 3/8, 2 7/8 and 4 1/2 inch models. It notes that "Residential piles cover most decks, sunrooms, additions, and sheds." [10] Postech lists its Thermal Pile as a separate category for frost-sensitive sites [10].

A heavier load calls for a larger pile. Helical pile cost rises with the diameter [1]. A covered deck is the common case. Postech Hamilton's timber-frame covered deck in Binbrook sits on P312 piles. A roof brings loads that an open platform doesn't have.

Depth to bearing soil

A pile has to pass the frost line and reach soil that can carry the load. Postech puts the frost line at "typically 4 to 6 feet in most of Canada and the northern United States" [9]. The shafts on its smaller models come in 7 ft and 10 ft lengths [10].

The final depth is read on the machine. The installer turns each pile to a set torque, and "When the required torque value is reached, load capacity is confirmed." [11] Hamilton-area sites often have clay in the ground. Depth is confirmed pile by pile. Ask how a quote handles a pile that has to go deeper than planned.

Access to the yard

The piles go in with a compact machine. It has to reach every post location. Postech's installers use "compact equipment that fits through a standard 36-inch gate opening" [12].

A narrower gate, a steep grade or a finished garden in the way adds time. Postech gives 3 to 6 hours for most deck installs, "depending on pile count and site access" [9].

Mobilization

Mobilization is the cost of getting the crew and the machine to your address. It is the same trip for 4 piles or 12, so it weighs more on a small job. If a shed, a pergola or a set of stairs is also on your list, quote it with the deck so one visit covers everything.

Helical piles cost Ontario checklist: Hamilton permit fees and paperwork

In short: An attached deck needs a permit at any size. Get it issued before the piles go in.

The part of helical piles cost Ontario homeowners overlook is the paperwork. In Hamilton it starts before the first pile goes in.

When a permit applies. Any deck attached to the house needs a building permit, whatever its size [5]. Postech notes that permit rules "apply to the structure itself, not specifically to the foundation type" [9]. The fee is set by the deck, so it is the same on piles or on concrete. The Hamilton deck permit guide covers detached decks and the other cases.

What it costs. The $291 minimum from the example above holds for any deck up to about 54 square metres, or 584 sq ft. Above that, the City's area rate takes over [2].

What goes in the application. The City asks for [5][4]:

  • A site plan showing the house, the deck and the setbacks

  • Construction drawings with footing details: size, spacing and depth

  • Engineer approved specifications for helical piers

  • The permit fee

Your installer supplies the pile specifications. Ask for them at the quote stage so the application can go in complete.

What starting early costs. Piles are the footings, and footings are the first stage the City's surcharge applies to. Schedule C of the building by-law adds a percentage of the permit fee when work starts before the permit is issued [6].

Work done before the permit is issued

Added to the permit fee

On a $291 permit

Footings or foundations started

25%

About $73

Structural framing started

50%

About $146

Structural framing completed

75%

About $218

Work completed

100%

$291

One more date to plan around: Ontario requires a utility locate request before you dig, at least 5 business days ahead for a single address [7].

How to compare helical piles cost between quotes

In short: Compare scope before price: pile count, model, depth terms, engineering documents, mobilization, HST and warranty.

Two quotes can sit a long way apart and both be fair, because they cover different scopes. Before you compare helical piles cost on the bottom line, check that each quote answers the same six questions.

  1. Where did the pile count come from? A count from your drawings is a number you can build on. A count from the deck's size is an estimate.

  2. Which pile model and length is priced? The model should match the load at each post.

  3. What happens if a pile goes deeper? Ask how extra depth is charged before the machine arrives.

  4. Are the engineering documents included? That means the engineer approved specifications for the City, and the torque record for each pile [11].

  5. Is mobilization in the price, and is HST shown? Either one can sit outside the headline number.

  6. Is the warranty in writing? Postech states that "Every Postech installation is backed by a written lifetime warranty" [9]. Its FAQ adds that "Self-installation is not covered under warranty" [1].

If one of your quotes is for concrete, set the screw pile foundation cost against everything the concrete job includes.

Cost line

Screw piles

Concrete footings

Digging and soil removal

Minimal excavation

A hole at each footing, with soil to remove

Forms and concrete

None

Forms or sonotubes, then concrete delivery and placement

Wait before framing

No curing delay

Curing time before the deck can be framed

Neither system is cheaper on every site, so compare the total installed cost. See helical piles vs concrete in Hamilton for the full comparison.

Screw pile cost FAQ

In short: Quick answers on Postech pricing, pile counts, DIY, lifespan, free quotes and permit timing.

How much do Postech screw piles cost?

Postech's published figure for a standard residential deck of 6 to 10 piles is $1,500 to $4,500 installed. That is a network-wide range. Postech Hamilton prices each job from the deck plan and the site. [1]

How much does a screw pile cost on its own?

There is no single price for one pile. Postech ties cost to pile diameter, site conditions and region, and the number of piles sets the total. [1]

How much do helical piles cost compared with screw piles?

The same. Helical pile and screw pile are two names for one product, a steel shaft with a helix that is turned into the ground. The cost of helical piles and the cost of screw piles are one question. [9]

Does helical piles Ontario cost change from city to city?

Yes, in two ways. Postech lists region among its cost factors [1], and each municipality sets its own permit fees. In Hamilton the minimum permit fee is $291 [2].

How many screw piles does a 12 x 16 ft deck need?

Deck size alone doesn't set the number. The count follows the beam layout, spans, height and loads. For the pile systems it evaluates, the Canadian Construction Materials Centre says an engineer determines the number and spacing. [3]

Can I cut the cost by installing screw piles myself?

Not with Postech piles. They are installed only by certified dealers, and Postech states that "Self-installation is not covered under warranty". It adds that a self-installed pile would not meet building code requirements for a permitted structure. [1]

How long do screw piles last?

Postech states that its Thermal Piles are hot-dip galvanized for corrosion protection, with "a minimum established service life of 75 years" in the worst conditions. [9]

Is a screw pile quote free?

Yes. Postech installers provide "free, no-obligation quotes", and Postech Hamilton offers a free quote by phone or through its contact form. [9]

When is the Hamilton permit fee paid?

With the application. The City states: "You must pay permit fees when you submit your Building Permit application." [2]

Get a screw pile quote in Hamilton

In short: Send the plan, the loads, access photos and your date for a free quote.

A quote for screw pile deck footings is only as exact as what goes into it. Send Postech Hamilton:

  • The deck plan, or a sketch with dimensions and height

  • Any roof, hot tub or stairs that are part of the build

  • Photos of the route into the yard, gate included

  • The date you want the piles in

Postech Hamilton works across Hamilton, Ancaster, Dundas, Stoney Creek, Binbrook and Mount Hope.

Grant and Kairi West will quote the job with a pile count, specifications and a total price. Call (905) 745-9455 or request a free quote.

Sources

  1. Postech Screw Piles (Pieux Vistech Inc.). Frequently Asked Questions. Read October 8, 2026

  2. City of Hamilton. Building Permit Fees (Schedule A to Building By-law 15-058). Date modified March 3, 2025

  3. National Research Council Canada, Canadian Construction Materials Centre. CCMC Technical Bulletin: Auger-Installed Steel Pile Foundations. March 26, 2019

  4. City of Hamilton, Building Division. Building Permit Requirements: Residential Decks / Porches (checklist)

  5. City of Hamilton. Porches and Decks. Date modified August 25, 2026

  6. City of Hamilton. Building By-law No. 15-058, Schedule C (office consolidation, updated January 31, 2025)

  7. Ontario Dig Authority (formerly Ontario One Call). Locates Overview. Read October 8, 2026

  8. Canada Revenue Agency. GST/HST calculator (and rates). Date modified April 1, 2025

  9. Postech Screw Piles (Pieux Vistech Inc.). Screw Pile Deck Foundations. Read October 8, 2026

  10. Postech Screw Piles (Pieux Vistech Inc.). Products and specifications. Read October 8, 2026

  11. Postech Screw Piles (Pieux Vistech Inc.). How Screw Piles Work. Read October 8, 2026

  12. Postech Screw Piles (Pieux Vistech Inc.). Foundation Stabilization. Read October 8, 2026

Postech Hamilton Screw Piles

Postech Hamilton Screw Piles

Postech Hamilton is a locally operated construction and foundation team serving homeowners, contractors, builders, and project managers across Hamilton, Ancaster, Dundas, Flamborough, Binbrook, and surrounding communities. From backyard projects to municipal infrastructure, helical piles provide immediate, dependable support—with less mess and downtime.

Back to Blog